![background image](http://html1.mh-extra.com/html/r-tech/i-mig200/i-mig200_operation-instructions-manual_3085160008.webp)
8
8
Connections for I-Mig 200
Rear machine connections
Fig 1
1.
Fuse Holder
Fuse for wire feed motor protection
2.
Auxiliary AC output
For water cooler – Maximum load 3A – Do not connect to power tools etc
3.
Gas inlet connection
Connect gas hose to rear of machine and then to regulator on gas bottle. Ensure all
connections are tight to ensure no loss of gas.
Make sure gas bottle is secured to machine securely using supplied chain to avoid injury.
4.
Mains input cable
Fit required plug as per your electrical installation
Содержание I-MIG200
