-
-
-
-
-
-
+
+
+
+
+
+
36 VOLTS !
Fron
t of
m
a
ch
in
e
>
@
Changing Batteries
Stop machine in a clean area next to the charger. Turn off machine.
For safety:
Before leaving or servicing the machine; stop on level surface, turn off machine and remove key.
Use eye protection.
1. Tip back tank to expose batteries.
2. Disconnect main battery cables from machine.
3. Use the proper size wrench to disconnect main ground wire first and secure cable terminal away from batteries.
4. Disconnect main positive lead and secure cable and remove one at a time.
5. Loosen both terminals on each jumper cable and remove one at a time, and place away from machine.
6. Prepare a suitable site to place the batteries, store on a wood pallet, not on concrete.
7. Attach suitable battery lifting device and lift batteries from the machine
Warning!
Batteries are a possible environmental hazard & extremely heavy. Consult your battery supplier for safe removal &
disposal methods.
Note orientation of the positive and negative posts is critical for cables to reach.
Do not lift from battery posts, which cannot support the weight.
(See below)
PAGE 29
