R.P.S. Corporation 290 Series, Инструкция по эксплуатации и каталог запасных частей

Страница: 16 / 53

290/350 Operator and Parts Manual V13.1210
16
MAINTENANCE
DAILY MAINTENANCE
1. REMOVE AND CLEAN PADS OR BRUSHES.
NEVER USE SOILED PADS WHEN CLEANING. RE-
PLACE PADS WHEN THEY BECOME PACKED WITH
RESIDUE.
2. REMOVE AND CLEAN DEBRIS FROM THE
FLOAT SHUT-OFF SCREEN LOCATED INSIDE THE
RECOVERY TANK.
3. DRAIN AND RINSE TANKS THOROUGHLY IN-
SPECT VACUUM HOSE FOR ANY OBJECTS OB-
STRUCTING THE AIR FLOW.
4. RAISE SQUEEGEE AND WIPE BLADES WITH
A CLEAN CLOTH. STORE SQUEEGEE IN THE
RAISED POSITION TO PREVENT DAMAGE OR
SETTING OF THE BLADES.
5. WIPE DOWN MACHINE IF NEEDED. USE A
NONABRASIVE, NON SOLVENT CLEANER, OR A
CLEAN DAMP CLOTH.
6. RECHARGE THE BATTERIES IF NEEDED.
WEEKLY MAINTENANCE
1. CHECK BATTERY WATER LEVEL IN EACH
CELL OF THE BATTERIES, AND FILL AS NEED-
ED. ALWAYS USE DISTILLED WATER TO REFILL
BATTERIES. BATTERIES SHOULD BE FILLED
APPROXIMATELY 3/4” TO 1” ABOVE THE PLATES.
OVERFILLING WILL CAUSE THE BATTERIES TO
LEAK DURING CHARGING. THE CHARGING
PROCESS CREATES GAS BUBBLES INSIDE THE
BATTERY, WHICH EFFECTIVELY INCREASES THE
VOLUME OF THE ELECTROLYTE.
2. CLEAN BATTERY TOPS TO PREVENT CORRO-
SION.
3. ROTATE BRUSHES. ROTATE THE LEFT TO THE
RIGHT AND RIGHT TO LEFT. ON CYLINDRICAL
MODELS FROM FRONT TO BACK, OR END TO
END IF USING DIFFERENT MATERIALS.
MONTHLY MAINTENANCE
1. CHECK SCRUB HEAD AND SQUEEGEE LIFTING
CABLES FOR WEAR AND SPRING TENSION.
2. CHECK MACHINE FOR WATER LEAKS AND
LOOSE NUTS AND BOLTS.
3. CHECK TO SEE IF BATTERY CABLES ARE
TIGHTENED. (TIGHTEN IF NEEDED)
4. CHECK PARKING BRAKE
5. CHECK CONDITION OF SCRUB DECK LIFTING
CABLE.
YEARLY MAINTENANCE
1. CALL YOUR LOCAL DEALER FOR YEARLY
MAINTENANCE
STORING MACHINE
1. BE SURE TO FLUSH THE TANKS OUT COM-
PLETELY, AND TO DRAIN ALL WATER FROM THE
MACHINE.
2. REMOVE THE RECOVERY TANK LID TO PRO-
MOTE AIR CIRCULATION.
3. RAISE BRUSHES AND SQUEEGEE.