Version 09.12.2020
HW: CAM(V100)/(V11+V41)
ab Serien Nr: NZ20NOV694
RL4-SY3-R5
P
a
g
e
16
3.
Connecting Video sources
It is possible to connect an after-market rear-view camera, an after-market front camera and
two more video sources to the video-interface.
Before the final installation, we recommend a test-run to detect a incompatibility of
vehicle and interface. Due to changes in the production of the vehicle manufacturer
there’s always a possibility of incompatibility.
Connect the 12pi
n interface cable’s female 12pin
connector to the male 12pin connector of
the video-interface.
Connect the video RCA of the Rear-
view camera to the 12pin interface cable’s female
RCA connector
„Reverse V4
.
Connect the front camera’s video RCA connector to the 12pin interface cable’s female
RCA connector
„Front V3“
.
Connect the video RCA of the AV source 1 and 2 to the 12pin interface cable’s female RCA
connector
“Left (V1)”
and
”Right (V2)”
.
