Version 16.03.2022
HW:CAM(V100)/(V33)
CI-RL4-MIB
P
a
g
e
5
Limitations
Video only
The interface inserts ONLY video signals into the infotainment. For inserting
Audio signals either the possibly existing factory audio-AUX-input or a FM-
modulator can be used. If 2 audio sources shall be connected to the infotainment,
an additional electronic is necessary to switch them.
Factory rear-view camera
Automatically switching-back from inserted video to factory rear-view camera is
only possible while the reverse gear is engaged. To delay the switch-back an
additional electronic part is required.
After market front camera
The front camera will automatically be switched for 10, 15 or 20 seconds
(adjustable) after disengaging the reverse gear. A manually front camera switching
is possible by external keypad.
PDC and guidelines
If the video interface does not receive the required information from the vehicle
CAN-bus, neither guide-lines nor optical PDC display will be supported.
1.3.
Connectors – video interface
The video-interface converts the connected after-market sources video signals into a LVDS signal
which is inserted in the factory monitor using separate trigger options. Further it reads the
vehicle’s digital signals out of the vehicle’s CAN-bus and converts them for the video interface.
