Page 13
7.4 Armrest Lock Assembly
To dismantle the assembly, place a screwdriver or similar tool between the starlock washer (F37)
and the lock lever (TSD 1323) and prise apart. Remove the starlock washer, plain washer (Q5)
and the lock lever.
Withdraw the lock pin (TSD 1306) and plunger spring (TSD 1229) from the pin housing in the
armrest location tube.
To assemble, place the plunger spring (TSD 1229) over the lock pin (TSD 1306) and locate in the
pin housing inside the armest location tube.
Pull the lock pin (TSD 1306) through the pin housing using a small pair of pliers and place a length
of tube in the armest location tube or reverse the armrest in the location tube. This will retain the
lock pin inside the pin housing.
Fit the lock lever (TSD 1323) and plain washer (Q5) over the lock pin and press a new starlock
washer (F37) onto the end of the lock pin. Thumb pressure should be sufficient to fit the starlock
washer or alternatively tap with a light hammer.
7.B Diagram
RJ No
Starlock Washer
F-37
5mm Plain Washer
Q5
Lock Lever
TSD-1323 Plunger
Spring
TSD-1229 Lock Pin
TSD-1306
