6
BA_BM_ERGOPLAN-1-2-3_EN_46-21.docx
3
General
The operating manual must be read carefully and understood before handling the
work and assembly bench! If anything is unclear, please contact the manufacturer.
The Ergoplan series was specially developed for manual workstations in manufacturing, assembly operations and
maintenance. They are suitable for use in industry and trade as well as in school facilities and training centres.
The various models already cover a wide range of applications. In addition, a comprehensive range of accessories
allows even better adaptation to different applications.
3.1
Advantages
•
Back-friendly, foot-operated hydraulic height adjustment on all available models
•
Uniform adjustment to height, even under uneven load distribution
•
The workbench top moves absolutely parallel and smoothly
•
The side walls provide stability and protect the mechanics
•
Optimal stand via adjustable feet (± 15 mm)
•
High-quality hydraulic unit on the left side
•
Basic solid and massive substructure
3.2
Applications
Ergoplan can be used for all work corresponding to its intended use in section
4.2. The work and assembly
bench is suitable for use as work equipment for transporting, lifting and lowering loads and also as a height-
adjustable assembly table. Typical areas of application are workplaces in manufacturing, assembly and mainte-
nance, where precise height adjustment for ergonomic working as well as high flexibility and mobility are of
particular importance.
Ergoplan must not be used for work that does not correspond to its intended use (see section
3.3
Target Group and Previous Experience
This operating manual is intended for the operating and maintenance personnel of the work and assembly bench.
The operating personnel is to be determined by the operator and must further meet the following requirements:
•
Basic technical and mechanical knowledge as well as knowledge of the associated technical terms
•
Reading and understanding these operating and maintenance instructions
In order to acquire the knowledge required to operate this work and assembly bench, the operator must ensure
the following measures:
•
Product training for every operator (also possible external personnel)
•
Regular safety instruction
3.4
Requirements for the Operators
The operator is responsible for the safe use of the work and assembly bench!
The work and assembly bench may only be operated by trained personnel who have also read this manual.
Inspection, maintenance, cleaning and repair may only be performed by technical specialists
with product-specific training and mechanical and/or electrical training.
Specialists with product-specific training are to be commissioned and held responsible for
planning and checking the work.
The national protective regulations for employees must be observed
The legal minimum age must be observed.
