32
| OTHER SETTINGS
required 2TONE signal.
4.
Press
[CALL]
Key to send the same 2TONE
you have selected in Menu 22.
5Tone Receive Settings, Transmit
Setting (Call Key)
1.
Press
[MENU]
Key select 18 OPTSIG, press
[MENU]
Key select 5TONE function.
2.
Press
[MENU]
Key select 22 S-INFO, press
[MENU]
Key select pre-code signal group (1-
15). (The 5Tone
Signal must be saved first in
the PC software setting under 5TONE settings)
3.
If properly set up (on Menu 18, and 19), your
radio will open the squelch when it receives the
required 5TONE signal.
4.
Press
[CALL]
Key to send the same 5TONE
you have selected in Menu 22.
Scanning modes
The scanner is configurable to one of three ways
of operation: Time, carrier or search, each of w
hich is explained in further details in their respec-
tive section below.
Setting scanner mode
1.
Press the
[MENU]
key to enter the menu.
2.
Enter “17” on your numeric keypad to come to
scanner mode.
3.
Press the
[MENU]
key to select.
4.
Use the
[UP
Y
]
and
[DOWN
Z
]
keys to select
scanning mode.
5.
Press the
[MENU]
key to confirm and save.
6.
Press the
[EXIT/AB]
key to exit the menu.
Time operation:
In Time Operation (TO) mode, the scanner stops
when it detects a signal, and after a factory pre-
set time out, it resumes scanning.
Carrier operation:
In Carrier Operation (CO) mode, the scanner
stops when it detects a signal, and after a factory
preset time with no signal it resumes scanning.
Search operation:
In Search Operation (SE) mode, the scanner stops
when it detects a signal. To resume scanning you
must press and hold the key again.
Содержание KT-8900D
Страница 1: ...Mini color screen MobileRadio USER S MANUAL...
Страница 2: ......
Страница 41: ...Mini color screen MobileRadio...
