QYT KT-8900D, Руководство пользователя

Страница: 35 / 41

OTHER SETTINGS | 31
accept DTMF signaling) it will command the radio
to disable transmitting and receiving. The Master
ID station must first identify and send the PTTID
(set in software as “Master ID”) – once the Master
Station identifies itself, the radio is set to receive
command tones, if the Monitor Remote Kill tone
is received - the radio will no longer be able to
transmit or receive. Both the master ID station and
remote stun signal must be set up in software.

Remote Revive
First set the DTMF Remote Revive Tone and
Master Control ID in Software:
When your radio
receives the DTMF Remote Revive Tone Se-
quence (Set by software) (Requires Menu 18 and
19 to accept DTMF signaling) it will reactivate the
radio after it has been remotely stunned or killed.
The Master ID station
must first identify and send
the PTTID (set in software as “Master ID”) – once
the Master Station identifies itself, the radio is set
to receive command tones, if the Monitor Remote
Kill tone is received - the radio will revived from a
stun/kill command. Both the master ID station and
remote stun signal must be set up in software.

DTMF Receive Settings, Transmit
Setting (Call Key)
1. Press [MENU] Key select 18 OPTSIG, press
[MENU] Key select DTMF function.
2. Press [MENU] Key select 22 S-INFO, press
[MENU] Key select pre-code signal group (1-
15). (The DTMF Signal must be saved first in
the PC software setting under DTMF settings.
3. If properly set up (on Menu 18 and 19), your
radio will open the squelch when it receives the
required DTMG signal.
4. Press [CALL] Key to send the same DTMF
you have selected in Menu 22.

2TONE Receive Settings, Transmit
Setting (Call Key)
1. Press [MENU] Key select 18 OPTSIG, press
[MENU] Key select 2TONE function.
2. Press [MENU] Key select 22 S-INFO, press
[MENU] Key select pre-code signal group (1-
15). (The 2Tone
Signal must be saved first in
the PC software setting under 2TONE settings)
3. If properly set up (on Menu 18 and 19), your
radio will open the squelch when it receives the