QWICK KURB
®
, INC.
Long Term Installation Manual
TRANSPORT
The recommended manner of transport is on flat bed trucks or heavy-duty trailers.
QWICK KURB
®
is heavy; a one-meter L60 SEPARATOR weighs approximately 34 lbs. Care
must be taken to insure that units are secured and not stacked so high that they fall during
movement, or personal injury and damage may result. Pallets must be strong enough to
support the combined weight. Do not double stack pallets. Transport requires banding or
other support suitable for the mode of transportation. Stack units on pallets for transport in
the same pattern described in the
Storage
section on page 28. Pack nuts and washers into a
transport safe container.
Markers/bollards should be boxed for transport. Stack the markers/bollards vertical, or lay
them horizontally on the thin edge side by side. Either way, you should place them at
opposite ends of each other to optimize packing space, and prevent the Stabilizing Bars or
reboundable Flex Boots from scraping the sheeting. In addition, it is best to place cardboard
or paper between stacks/rows to prevent damage to sheeting. Pack S65 black Securing Arcs,
and hardware in transport safe containers. If L65 Reflective arcs are detached, pack them in
transport safe containers as well.
Phone: 800-324-8734
Fax: 813-645-4856
www.qwickkurb.com
1/21/2016
29
