QWICK KURB
®
, INC.
Long Term Installation Manual
5. At the end of the set-up, place an L62 Female End unit (Fig 3) on to the steel hook
and bolt of the last one-meter L60 SEPARATOR.
Fig 3
CAUTION:
Never allow the L60 SEPARATOR to be in place without the L61 Male and Female L62
End units properly installed. An uncovered steel hook and the blunt end on the one-meter L60
SEPARATOR would be a danger to vehicles, bicycles, pedestrians, and others.
CONNECTING THE L60 SEPARATOR UNITS
To connect the L60 SEPARATOR units:
6. After the L60 SEPARATOR units have been placed into position on the roadway,
Install a ½” washer over the bolt threads and hand tighten a 17mm nut to the
connecting bolt.
7. Use the impact wrench with the 17 mm
shallow
socket to tighten the nut to the bolt
connecting the steel hook of the adjoining L60 SEPARATOR unit.
CAUTION:
All
bolts must be fastened in order for the system to function safely. Failure to fasten all
of the units together creates the risk of separation and shifting. The installer and user assume
significant liability if connecting hooks are not secured as instructed.
Phone: 800-324-8734
Fax: 813-645-4856
www.qwickkurb.com
1/21/2016
17
