© Copyright Qvis ®. All documentation rights reserved.
31
Picture 2.2.5-31 IP address Filter
Event
→ Motion detection
Area setting:
hold down left mouse key and drag it across the live
preview footage window, then release mouse left key, this will finish
drawing the area. When user finishes drawing the area, arming
schedule and linkage methods can be set.
Click
‘Clear all’ to clear drawing area.
Tick the
‘enable motion detection’ box will start the IP camera motion
detection function. See picture 2.2.5-32. Sensitivity: 0-100 settable.
Picture 2.2.5-32 Motion Detection
‘Arming schedule’ will show the current motion detection arming time.
