WWW.DUALSIG.COM
17
Detect:
Detect the storage connected with the DVR such as hard disk or universal disk.
Erasure:
Choose the ile to delete and click erasure to delete the ile.
Stop:
Stop the backup.
Backup:
Click backup button and the dialog box is popped up. You can choose
the backup ile according to the type, channel and time.
Picture 3.6 recording backup
Remove
: Clear the ile information.
Add
: Show the ile information satisfying the set ile attributes.
Start/Pause
: Click the play button to start the backup and click the pause button
to stop the backup.
Cancel
: During backup you can exit the page layout to carry out other functions.
(
File searching
) Search the ile according to the searching parameter.
Picture 3.7 ile searching
File type
: Set the searching ile type.
Channel
: Set the searching channel.
Start Time
: Set the searching time scan.
End Time
: Set the end time of the ile search
Play Mode
: Select different play mode, Skip Decode,Average Decode and Full Decode.
Sync Mode:
Select it for playback all chosen channels at the same time
(
Playback control
) Refer to the following sheet for more information.
WWW.DUALSIG.COM
