WWW.DUALSIG.COM
13
3 Basic operation
Note: The button in gray display indicates nonsupport.
3.1 Turn on
Plug in and turn on the power supply switch. If the Power supply indicator light
lights up then the video recorder has turned on. After startup you will hear a
beep. The default setting of the video output is a multiple-window output
mode. If the startup time is within a set video recording time, the timing video
recording function will start up automatically. Then the video indicator light of the
corresponding channel will light up to let you know the DVR is working normally.
Note:
1).
Make sure that the input voltage corresponds with the switch of the DVR
power supply.
2).
Power supply demands: 220V±10% /50Hz.
We suggest using UPS to protect the power supply under suitable conditions.
3.2 Turn off
There are two methods to turn off the DVR. Entering [main menu] and choosing
[turn off] in the [turn off the system] option is called soft switch. Pressing the
power supply switch is called hard switch.
Illumination:
1).
Auto resume after power failure
If the DVR is shut down abnormally, it can automatically backup video and
resume the previous working status after a power failure.
2).
Replace the hard disk
Before replacing the hard disk, the power supply switch in the rear panel must
be turned off.
3).
Replace the battery
Before replacing the battery, the setting information must be saved and the power
supply switch in the rear panel must be turned off. The DVR uses a button
battery. The system time must be checked regularly. If the time is not correct you
must replace the battery, we recommend replacing the battery every year and
using the same battery type.
Note:
The setting information must be saved before replacing the battery
otherwise information will be lost.
3.3 System Login
When the DVR boots up, the user must login and the system provides the
corresponding functions in the user preview. There are three user settings. The
names are
admin
,
guest
and
default
and these names have no password.
Admin
is the super user preview;
guest
and
default’s
permissions are preview and video
playback.
User
admin
and
guest’s
password can be revised, while their permissions can’t
be revised; user
default
is the default login user whose permission can be revised
but not its password.
WWW.DUALSIG.COM
