Fig. 5
Fig. 6
WARNING –
Turn off the power.
1. Remove the two fan base screws that
pre-installed on the top of the wall
mounting plate, keep it for future use.
2. Install the wall mounting plate to the
wall junction box and secure with six
screws provided. (Figure 2)
3. Remove the three wire nuts from the
bundled wires. (Figure 3)
4. Attached the bundled wires to the
building supply wires out of the wall
junction box with wire nuts removed
previously. (Figure 3)
Black to black
White to white
Blue to blue
5. Detach the wireway passage plate from
the fan base by removing two screws
from the fan base. (Figure 4) The plate
covers a temporary wireway passage for
making the wiring connection.
6. Hanging the fan motor assembly to the
wall mounting plate, ensure the two
hanging bars sliding into the notch of
hook completely. (Figure 5)
NOTE:
Make sure the two wire
connectors are revealed through the
wireway passage after hanging the fan
motor assembly onto the wall mounting
plate.
7. Make the connection for the two wire
connectors, and then tuck the wires inside
the fan base. (Figure 5)
8. Re-install the fan base screws that
removed previously into the fan base.
(Figure 6)
9. Re-attach the wireway passage plate
onto the fan base and secure with screws
removed previously. (Figure 6)
10. Your wall fan is now completed the
wall mounted installation.
4. MOUNTING/INSTALLATION
OF THE FAN
Fig. 2
Fig. 3
Fig. 4
Screws
Fan base
Screws
Fan base screws
Wire nuts
Bundled
wires
To wall control
Wall mounting
plate
Wall mounting
plate screws
Fan base screws
To wall control
Hook
Hanging
bars
Wire
connectors
To wall control
Wireway
passage
plate
Wireway
passage
plate
