1 Tap through
work top
Push the tap through the hole in the
work top. NOTE: When fitting the tap
in a 32 mm hole, the black plastic ring
needs to be removed from the tap
first.
2 Securing the
tap
Set the tap to the desired position
and secure it with the metal ring and
screw ring supplied.
3 Securing tap
screws
Tighten the screws in the screw ring.
1
2
Fitting Nordic tap
• Note: The total length of the hose between the boiling-water tap and tank is
only 70 cm. The tank must therefore be fitted close to the tap. Extension
hoses are available in different lengths but are not normally required.
• Note: The small fibre washers supplied with the tap rings are not required yet
at this point. One will be used for connecting the tap and tank hose (see sec-
tion E), the second one is a spare.
B
1
3
