1
3
2
1. Preparing the cartridge
Remove the red cap from the cartridge.
2. Fitting the cartridge
Screw in the cartridge by turning
it clockwise until it stops. Do not
overtighten.
3. Opening the shut-off valve
Open the shut-off valve by turning the
red knob anticlockwise.
4. Flushing the cartridge
Switch on the main water supply and
check for leaks. Plug the tank into the
socket and turn it on. To dispense filtered
water when you have a Flex, Fusion, or
Nordic single tap, push and hold down
the textured ring until the light ring turns
blue, then turn the textured ring. To
dispense filtered water when you have
a Front tap, turn the textured ring to the
first click (the light ring turns blue). Let
the water run through the cartridge for
two minutes before use. Black water will
flow out initially. This is carbon residue
from the filter and is completely harmless.
If the Cold Water Filter function is not
available immediately, turn the Quooker
system off and on again.
Using Cold Water Filter
– The lifespan of a new Cold Water Filter cartridge is twelve months.
– After twelve months the Cold Water Filter will automatically give an audible signal after use of
filtered water.
– The flow rate of the filtered water will be significantly lower than the unfiltered water.
D
4
