1
3
2
4
1. Disconnecting tank
Disconnect the tap hose from the top of
the tank using size 12 and 14 spanners.
2. Reconnect tank using T-joint
Connect the T-joint to the tank using
size 12 and 14 spanners and a red fibre
washer. Push the plastic hose (B) firmly
into the T-joint and connect the tap hose
to the T-joint with a red fibre washer.
Make sure that the hoses do not block
the jack-plug ports on the tank.
3. Place locking clip
Secure the plastic hose with the locking
clip.
4. Connecting LED cable
Remove the plastic protective cover from
the second jack-plug port provided at
the back of the tank cover. Connect the
Cold Water Filter by plugging the LED
cable into the second jack-plug port.
Please note: the supplied cable clips can
be added to route the LED cable along
the hoses.
Connecting with tank
– Important: Let the tap hose cool down before disconnecting.
– The tank cover has two jack-plug ports, one for your tap LED cable and a second covered
port which will be used for the Cold Water Filter.
C
B
