background image

General Precautions 

Servicing

Generator service must be performed only by qualified repair personnel. Service or maintenance 
performed by unqualified personnel could result in a risk of injury.

When servicing a generator, use only identical replacement parts. Follow all appropriate 
instructions in this manual. Use of unauthorized parts or failure to follow maintenance instructions 
may create a risk of electric shock or injury.

Heart Pacemakers

WARNING! PEOPLE WITH PACEMAKERS SHOULD CONSULT THEIR  
PHYSICIAN(S) BEFORE USING THIS PRODUCT. ELECTROMAGNETIC  
FIELDS IN CLOSE PROXIMITY TO A HEART PACEMAKER COULD CAUSE  
INTERFERENCE TO OR FAILURE OF THE PACEMAKER.

Installation

• Ensure installation meets all applicable safety, local and national electrical codes. Have

installation performed by a qualified, licensed electrician and building contractor.

• All electrical work, including the earth-ground connection, should be completed by a licensed

electrician.

• Any separate fuel storage or generator supply facility must be built or installed in full compliance

with all relevant local, state, and federal regulations.

• It is recommended to use the generator only in well ventilated, outdoor areas. A running

gasoline engine will generate carbon monoxide, a colorless, odorless gas that, if inhaled, can
cause serious injury or death. If the generator is installed indoors, exhaust fumes must be piped
out of the building using leak-free, heat resistant piping. Pipes and silencer should not use any

flammable materials, nor should they be installed near the same. Generator exhaust fumes

must be within legal limits and installation must always meet local building codes.

9

Maintain labels and name plates on the generator and engine. These carry important information. 
If unreadable or missing, contact   Pulsar Products Inc. Immediately for a replacement.

Содержание 5250DF



























Отзывы: