background image

General Precautions 

Electrical Safety 

• All connections and conduits from the generator to the load must only be installed by trained and

licensed electricians, and in compliance with all relevant local, state, and federal electrical
codes and standards, and other regulations where applicable.

• The generator must be earth-grounded for fixed installations in accordance with all relevant

electrical codes and standards before operation.

• Do not attempt to connect or disconnect load connections while standing in water, or on wet or

soggy ground.

• Do not touch electrically energized parts of the generator and interconnecting cables or

conductors with any part of the body, or with any non-insulated conductive object.

• Connect the generator only to a load or electrical system (120 volt) that is compatible with the

electrical characteristics and rated capacities of the generator.

• Before servicing equipment powered by the generator, disconnect the equipment from its power

input.

• Keep all electrical equipment clean and dry. Replace any wiring where the insulation is cracked,

cut abraded or otherwise degraded. Replace terminals that are worn, discolored, or corroded.
Keep terminals clean and tight.

• Insulate all connections and disconnected wires.

• Guard against electric shock. Prevent body contact with grounded surfaces such as pipes,

radiators, ranges, and refrigerator enclosures.

    

Personal Safety

• Stay alert. Watch what you are doing, and use common sense when operating a generator. Do

not use generator while tired or under the influence of drugs, alcohol, or medication. A moment
of inattention while operating generators may result in serious personal injury.

• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing,

and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in
moving parts.

7

Содержание 5250DF



























Отзывы: