8-6
P/N 480-0049-00-13
Chapter 8: Diagnostics/Maintenance
Change Unit Date and Time
You can change the unit’s date and time via
Command Line Interface (CLI)
as follows:
1. Access the CLI through a Telnet session. See
Chapter 5: Getting Started: Command Line Interface (CLI)
for more information.
2. Access the Config module.
3. Type
date
followed by
mm/dd/yy/hh:mm:ss
and press
Enter
.
4. For example, type
config# date 06/14/02/22:14:00.
This command will set the current time to June 14,
2002 at 10:14 p.m.
