Preface-2
P/N 480-0049-00-13
About this Guide
What’s included?
This product guide is divided into chapters; each chapter describes a specific topic. The following chapters are
included:
•
About this Guide:
Describes what is included in the Product Guide, including typographical conventions.
•
Chapter 1
:
Overview.
Includes a general overview of the product, including a description of the
Tenor
DX’s
features and capabilities.
•
Chapter 2: Hardware Components.
Hardware description, including the front and rear panels, as well as
LEDs and required cables.
•
Chapter 3: Installation.
Describes how to install the
Tenor DX
unit, including how to connect, power up
and assign the IP address.
•
Chapter 4: Getting Started: Tenor Configuration Manager/Tenor Monitor.
This chapter tells you how to
use the
Tenor
Configuration Manager and Tenor Monitor
to configure/monitor the unit.
•
Chapter 5: Getting Started: Command Line Interface (CLI).
This chapter tells you how to access the CLI
and execute commands. A description of each CLI mode is also included.
•
Chapter 6: Call Detail Recording.
Describes the Call Detail Recording (CDR) feature, including how to
set up the CDR server and assign a password. In addition, instructions for reading CDR output are also
included.
•
Chapter 7: System Alarms.
Describes how to monitor and view alarms via Command Line Interface
(CLI). In addition, alarm definitions are also included.
•
Chapter 8:
Diagnostics/Maintenance
. Describes how to troubleshoot and monitor the health of the sys-
tem.
•
Appendix A: Specifications/Approvals:
A list of
Tenor DX
specifications and approvals.
•
Glossary
•
Index
•
Warranty/Approvals