
Q35
User’s
Manual
24
4.2 Replacingthe Battery Pack
To correctly replace the battery pack, proceed as follows.
1. Turn off the Q35™ handheld device.
2. Press the latch release button and pull the battery latch down as indicated in thefigures
below:
3. Remove the battery pack.
4. Replace the battery pack by pressing the latch release button and pulling thebattery
latch down, and then by inserting it towards the speaker and pressing itinto the Q35™
PDA until the battery latch is automatically closed.
Figure 19
CAUTION
If the battery pack is new or has not been recharged for a long time,it is necessary
to perform two or three charging and dischargingcycles (complete use) before it can
reach its maximum chargecapability.
The maximum time required to recharge a completely run-downbattery pack is about
2.5 hours for Li-Ion batteries.
NOTE
Even if the storage temperature range is wider, In order to achievethe longest battery
life, store the terminal and the spare batteriesbetween 20 to 30 ºC (68 to 86 ºF).
The Batteries must be charged at a temperature ranging from 0° to+45 °C (+32° to +113
°F).