
Q35
User’s
Manual
23
Chapter 4 Maintenance
4.1 Chargingthe Battery Pack
It is possible to recharge the battery pack by using the AC adaptor directly connected
to the Q35
TM
handheld device, see par. 2.5.Alternatively, it is also possible to recharge the
battery pack by using the Q35
TM
Single Cradle Desk or the Q35™ Vehicle Cradle.
The charging process is signaled by a bi-colored charging status LED positioned atthe
right side of the display (see par. 3.4).
When the battery pack is low, the amber LED positioned at the left side of the displayblinks.
If the battery pack is removed from the PDA, it can be recharged by inserting it intothe
Q35™ Multi-Battery pack Charger.
NOTE
Visit the following Microsoft Web site for the latest in updates andtechnical information:
http://www.microsoft.com/windowsmobile/activesync/default.mspx
NOTE
Rechargeable battery packs are not initially charged. Therefore thefirst operation to
perform is to charge them. See below.
NOTE
The battery pack autonomy varies according to many factors, such asthe frequency of
barcode scanning, RF usage, battery life, storage,environmental conditions, etc.