Quinny Speedi SX Скачать руководство пользователя страница 5

Страница: 5 / 7

Using the parking brake (see illustration 30)

• Always use the parking brake when parking Speedi SX, "also when at a standstill".
• Step on the pedal on the rear axle to lock the wheels (30).
• Always check whether the wheels are locked.
• Release the parking brake by pulling the pedal upward.
• The handbrake is for slowing down and should not be used as a parking brake. The handbrake works on both rear

wheels. If you squeeze the handbrake too firmly or quickly, there is a risk that you will stumble over the Speedi SX,
thus endangering your child.

Using the sun canopy (see illustrations 31 - 32)

• To attach the sun canopy, push the clips onto both sides of the frame at the desired height (31).
• Fasten the clasps onto the back of the pushchair seat (32).
• Remove the sun canopy by unfastening the clasps and pulling the clips from the handlebar.

Using the shopping basket (see illustration 33)

• The maximum weight allowance for the shopping basket under the Speedi SX is 5 kg.
• The other storage compartments on the pushchair have a maximum weight allowance of 0.5 kg.
• The shopping basket can be enlarged using the zipper on the side (33,1).
• The shopping basket can be removed by undoing the hooks (33,2).
• IMPORTANT: Only use the storage compartments provided and do not exceed the maximum weight allowance.
• IMPORTANT: The shopping basket must be completely empty before folding the frame.

MAINTENANCE (see illustrations 34 - 35)

Frame
• Check whether everything functions properly on a regular basis.
• If the Speedi SX becomes damaged, have your supplier check and / or repair it before using it again.
• To ensure the long-lasting use of the Speedi SX, dry it off with a soft rag after using it in rainy weather.
• Clean the frame using a damp cloth. Do not use any abrasive detergents.
• Riding through seawater is not advised. After use on the beach, clean the frame and wheels thoroughly in order to

prevent rust formation.

• Never use lubricants (containing silicone), as they attract dirt and grime.
• Note: Oil and grease will damage the functioning of the handbrake.

Cover
• Remove the pushchair seat from the Speedi SX (See Placing / removing the pushchair seat).
• Remove the safety harness (see Safety harness).
• Remove the support plate from the back (34).
• The cover and basket can be washed by hand in lukewarm water using a regular detergent (see Washing

instructions).

• To re-attach the cover, slide the board back in.
• Re-attach all clasps, press studs and velcro.
• IMPORTANT:Make sure the safety harness is secured properly.
• IMPORTANT:Never use the pushchair seat without the support plate.

Wheels
• Inflate the tyres to a maximum pressure of 28 PSI (2.0 Bar) using the pump supplied. Insufficiently inflated tyres

can lead to unnecessary wear and tear.

• If the inner tube has a puncture, you can repair it as you would a bicycle tyre or have it repaired at a bicycle repair shop.
• To replace the front tyre, first push in the pins on the front fork (35,1) and then slide the tyre off of the front fork (35,2).
• Always deflate the tyres when taking the Speedi SX on an aircraft, as the tyres could burst out due to the pressure

difference.

• Clean the wheels regularly and remove all sand and dirt. Do not use oil, grease or cleaners.

/ 9

I N S T R U C T I O N S F O R U S E

Placing / removing the Dreami carrycot (see illustrations 17 - 18)
and Maxi-Cosi car safety seat (see illustrations 19 - 20)

• Apply the brake on the Speedi SX (see Using the parking brake).
• Place the carrycot / car safety seat onto the adapters (17/19) with the foot end between the sides of the handle.
• Check to make sure the carrycot / car seat is secured by lifting it up by the handles.
• To remove, place your thumbs on the control buttons on both sides of the carrycot / car safety seat (18,1/20,1).
• Push in the buttons while lifting the carrycot / car safety seat from the Speedi SX (18,2/20,2).

When used as a pushchair (see illustrations 21 - 29)

Placing / removing the pushchair seat
• Apply the brake on the Speedi SX (see Using the parking brake).
• To remove the pushchair seat undo the velcro under the footrest (21,1) and undo the clasp (21,2) and the press

stud (21,3).

• Open the press studs on the bottom (22,1) and undo the velcro near the handlebar safety lock (22,2).
• Remove the pushchair seat from the frame.
• When placing the pushchair seat back onto the frame, make sure to re-attach all press studs, clasps and velcro.
• IMPORTANT: Make sure you remove the adapters before attaching the pushchair seat (see Placing / removing the

adapters).

• Check to make sure everything is securely fastened by lifting up the pushchair seat.

Safety harness
• Apply the brake on the Speedi SX (see Using the parking brake).
• Make sure the safety harness is loosened before placing your child (carefully!) into the seat.
• Slide the buckle sections together (23,1) and fasten the lap and shoulder belts into the crotch strap by clicking the

buckle sections into the fastener (23,2).

• Adjust the belts to the size of your child by lengthening or shortening the belts using the clasps (24).
• Push the buttons (25,1) to open the fastener (25,2).
• There are D-rings for securing an additional safety harness. Make sure the safety harness complies with all safety

standards (i.e. BS 6684) before using it.

• The shoulder belts are height adjustable. To change the height, open the cover on the back and adjust the clasp both

on the front in the cover and in the board. Tilt the clasp when adjusting (26).

• IMPORTANT: The press studs on the side of the seat are for attaching a footmuff only (27).

Footrest
• The footrest can be adjusted into 2 positions.
• Press both buttons under the footrest at the same time (28,1), and then adjust the footrest into the desired position (28,2).
• IMPORTANT: Never let your child sit or stand on the footrest.

instructions).

Back rest adjuster
• The pushchair seat back can be adjusted continuously from a sitting to a reclining position.
• To adjust the back rest, squeeze the adjusting section on the back (29,1) and adjust the strap until the seat is in the

desired position (29,2).

I N S T R U C T I O N S F O R U S E

8 /