Operation Manual - Port
Quidway S5000 Series Ethernet Switches
Chapter 1 Ethernet Port Configuration
1-2
z
Set Ethernet port suppression ratio
z
Set link type for Ethernet port
z
Add the Ethernet port to specified VLANs
z
Set the default VLAN ID for the Ethernet port
z
Set the time interval of calculating port statistics information
1.2.1 Enter Ethernet port view
Before configuring the Ethernet port, enter Ethernet port view first.
Perform the following configuration in system view.
Table 1-1
Enter Ethernet port view
Operation
Command
Enter Ethernet port view
interface
{
interface_type interface_num | interface_name
}
1.2.2 Enable/Disable Ethernet Port
The following command can be used for disabling or enabling the port. After configuring
the related parameters and protocol of the port, you can use the following command to
enable the port. If you do not want a port to forward data any more, use the command to
disable it.
Perform the following configuration in Ethernet port view.
Table 1-2
Enable/Disable an Ethernet port
Operation
Command
Disable an Ethernet port
shutdown
Enable an Ethernet port
undo shutdown
By default, the port is enabled.
1.2.3 Set Description Character String for Ethernet Port
To distinguish the Ethernet ports, you can use the following command to make some
necessary descriptions.
Perform the following configuration in Ethernet port view.
