Quidway S3000 Series Скачать руководство пользователя страница 28

Страница: 28 / 37

Operation Manual - Security
Quidway S3000 Series Ethernet Switches

Chapter 2 AAA and RADIUS Protocol Configuration

2-13

shall make its best effort to send the message to RADIUS accounting server.

Accordingly, if the message from Quidway Series Ethernet Switches to RADIUS

accounting server has not been responded, switch shall save it in the local buffer and

retransmit it until the server responds or discards the messages after transmitting for

specified times. The following command can be used for setting to save the message

or not. If save, use the command to set the maximum retransmission times.

Perform the following configurations in RADIUS server group view.

Table 2-15

Enable/Disable stopping accounting request buffer

Operation

Command

Enable stopping accounting request buffer

stop-accounting-buffer enable

Disable stopping accounting request buffer

undo stop-accounting-buffer enable

By default, the stopping accounting request will be saved in the buffer.

2.3.9 Set the Maximum Retransmitting Times of Stopping Accounting
Request

Because the stopping accounting request concerns account balance and will affect the

amount of charge, which is very important for both the subscribers and the ISP, NAS

shall make its best effort to send the message to RADIUS accounting server.

Accordingly, if the message from Quidway Series Ethernet Switch to RADIUS

accounting server has not been responded, switch shall save it in the local buffer and

retransmit it until the server responds or discards the messages after transmitting for

specified times. Use the command to set the maximum retransmission times.

Perform the following configurations in RADIUS server group view.

Table 2-16

Set the maximum retransmitting times of stopping accounting request

Operation

Command

Set the maximum retransmitting times of stopping

accounting request

retry stop-accounting

retry-times

Restore the maximum retransmitting times of

stopping accounting request to the default value

undo retry stop-accounting

By default, the stopping accounting request can be retransmitted for up to 500 times.

Содержание S3000 Series






































Результаты поиска

Содержание S3000 Series

Отзывы:

Похожие инструкции для S3000 Series

Бренды по названию

Популярные бренды

Quidway S3000 Series, Руководство по эксплуатации

Результаты поиска

Содержание S3000 Series

Отзывы:

Похожие инструкции для S3000 Series

Бренды по названию

Популярные бренды