Quidway S3000 Series Скачать руководство пользователя страница 27

Страница: 27 / 37

Operation Manual - Security
Quidway S3000 Series Ethernet Switches

Chapter 2 AAA and RADIUS Protocol Configuration

2-12

Number of users

Real-time accounting interval (minute)

500 to 999

≥

1000

≥

By default,

minute

is set to 12 minutes.

2.3.7 Set Maximum Times of Real-time Accounting Request Failing to be
Responded

RADIUS server usually checks if a user is online with timeout timer. If the RADIUS

server has not received the real-time accounting packet from NAS for long, it will

consider that there is device failure and stop accounting. Accordingly, it is necessary to

disconnect the user at NAS end and on RADIUS server synchronously when some

unpredictable failure exists. Quidway Series Switches support to set maximum times of

real-time accounting request failing to be responded. NAS will disconnect the user if it

has not received real-time accounting response from RADIUS server for some

specified times.

You can use the following command to set the maximum times of real-time accounting

request failing to be responded

Perform the following configurations in RADIUS server group view.

Table 2-14

Set maximum times of real-time accounting request failing to be responded

Operation

Command

Set maximum times of real-time accounting

request failing to be responded

retry realtime-accounting

retry-times

Restore the maximum times to the default value

undo retry realtime-accounting

How to calculate the value of

retry-times

? Suppose that RADIUS server connection will

timeout in T and the real-time accounting interval of NAS is t, then the integer part of the

result from dividing T by t is the value of

count

. Therefore, when applied, T is

suggested the numbers which can be divided exactly by t.

By default, the real-time accounting request can fail to be responded no more than 5

times.

2.3.8 Enable/Disable Stopping Accounting Request Buffer

Because the stopping accounting request concerns account balance and will affect the

amount of charge, which is very important for both the subscribers and the ISP, NAS

Содержание S3000 Series






































Результаты поиска

Содержание S3000 Series

Отзывы:

Похожие инструкции для S3000 Series

Бренды по названию

Популярные бренды

Quidway S3000 Series, Руководство по эксплуатации

Результаты поиска

Содержание S3000 Series

Отзывы:

Похожие инструкции для S3000 Series

Бренды по названию

Популярные бренды