QuickWorldWide Super Learner Pro, Инструкция по эксплуатации

Страница: 50 / 85

5-2 TAIL ROTOR ASSEMBLY
No Bag# Description Qty No. Bag# Description Qty
1 Frame Tail Case Side Plate 2 12 5 Tail Pitch Control Lever 1
2 5 Tail Pitch Lever Mount 1 13 HB M3x5x1 Spacer 1
3 5 5X10X4Flange Bearing 2 14 HB M3x16 Cap Head Bolt 1
4 HB M2x6 Phillips Screw 2 15 HB M3 Locknut 2
5 In box Tail Boom (in Box) 1 16 Step 5-1 Tail Pulley Gear Subassy 1
6 In box Timing Belt (in Box) 1 17 HB M2.5x6 Cap Head Bolt 1
7 HB M3x6 Cap Head Bolt 6 18 HB M3x7 Flat Washer 1
8 5 Tail Case Cross Member 1 19 HB M3x25 Cap Head Bolt 1
9 HB M3x4 Pivot Ball Stud** 2 20 5 Tail Idler 1
10 5 M2.3 Medium Ball Link 2 21 5 3x6x5.5 Spacer 2
11 5 Tail Pitch Slider 1
First, to prevent the Boom End from
rotating, drill a 2.5mm hole in the side of
the Boom End, then secure with an M2.5x6
Cap Head Bolt.
Install the Bearings into the Tail Case Side
Plates. The flanges should be inside.
Sometimes, the holes are too tight; you
have to sand them a little bit.
Page 50 of 85