Quicksilver SmartCraft Systems, Справочное руководство

Страница: 21 / 110

1.0 Introduction
19 Reference Manual
RECORD/PLAYBACK
When all 51 frames of data have been recorded, the r displayed in the
lower right hand corner of the screen will change to an upper case R
(underlined).
→
←
ENGINE RPM 690 <E
TPI 1 VOLTS 0.59
BATTERY VOLTS 13.5
PWR 1 VOLTS 5.0 R
R = Recording complete.
To save the frames of data that have been captured, press the MODE
key. This will automatically take you to the Data Capture Screen. When
the Data Capture screen appears, press 1 –YES to save data.
Data Capture:
SAVE RECORDED DATA?
Press 1-YES 2-NO
Press the YES key if you want the data to be saved to a file. The
following screen will appear.
Save as:
__________.DMO
0123456789
0123456789
→
↓
←
↑
You may enter any file name up to eight characters in length. To name
the file, press a number key from 0 to 9 to select a number. Press the
↑
key and press a number from 0 to 9 to select the letters A to J.
Press the
↑
key to display the letters K to T and again to see the letters
U to Z.
Press the
↓
key to display the previous set of letters.
When you have entered the file name, press the ENTER key.