Quicksilver SmartCraft Systems, Справочное руководство

Страница: 71 / 110

2.0 Marine Diagnostics
69 Reference Manual
1- Mercury Marine
OIL PUMP LOAD TEST
Using the OUTPUT LOAD TEST function, you can exercise the ECM
and various output loads (ignition coils, injectors, pumps, horn, etc.)
controlled by the ECM.
Make sure that the SELECT FUNCTION menu screen is displayed on
the DDT. Press the 3 key.
Select Function:
1-OIL PUMP PRIME
2-CYLINDER MISFIRE
3-OUTPUT LOAD TEST
4-RESET BREAK-IN
↓
The SELECT LOAD TEST screen will appear. Use the
↓
key to display
the additional screens and the
↑
to return to the previous screen.
Select Load Test:
4-OIL PUMP
5-FUEL PUMP
6-HORN
↓
↑
This test is run with key switch in run position only (engine off). To test
the oil pump for mechanical activity press the 4 key.
LISTEN FOR OIL PUMP
SOLENOID OPERATING
DURING THIS TEST.
CONTINUE? 1=YES 2=NO
ENGINE ISN’T RUNNING
DURING THIS TEST.
PRESS 1 TO CONTINUE
PRESS MODE TO CANCEL
Press
To EXIT
Available
Press the1 key.
Press the1 key.
NOTE: This test will run automatically once the user has entered oil
pump test.
NOTE: It is normal for fuel pump to run during the test since the main
power relay controls the pump.