background image

 

- 14 - 

PAINTS

 

 

If your boat is kept in water where marine growth is a problem, the use of anti-fouling paint may reduce the 
growth rate. Be aware of environmental regulations that may govern your paint choice. Contact your local 
boating authorities for information. 

 

CLEANING AGENTS

 

 

Household cleaners should be used sparingly and not discharged into waterways. Never mix cleaners and 
be sure to use plenty of ventilation in enclosed area. DO NOT use products which contain phosphates, 
chlorine, solvents, non-biodegradable or petroleum based products. Citrus based cleaners are excellent for 
marine cleaning purposes and are safe for you and the environment. 

 

18. GUARANTEE

 

 

 

18.1 MOST IMPORTANT 

 

The guarantee, as described in this certificate, will only be valid once the enclosed "Registration Card" has 
been returned to BME, duly filled in, within 30 days of the date of purchase. 

 

18.2 COVERAGE 

 

Quicksilver craft used solely for recreational purposes, are guaranteed as of the date of purchase and for a 
period of: 
 

 

One year against any defects in fabric or workmanship of the craft or its components. 

 

 

Five years against aging, cracking or porosity of the inflatable tube material which could affect its 
performance. 

 

 

Five years against welding failures of the main thermowelded seams of the inflatable tube 
according to the ISO 6185 standards. 

 

 

This guarantee requires the inspection of the craft by an official Quicksilver service, within 24 
months from the date of purchase. Any workmanship defects will be repaired under guarantee. 
Servicing, transportation and damage due to use, will be charged to the user. 

 

18.3 LIMITATIONS 

 

The guarantee of this certificate will not apply if: 
 

1.

 

The craft has been sold in a country where there is not an authorized distribution service. 

 

2.

 

The boat is not registered in our Extranet Registration System. 

 

3.

 

The information on the Registration Card or the Identification Plate of the craft has been altered in 
any way. 

 
 
 
 
 
 

Содержание 8M920078R
















Отзывы: