Quicksilver 755CR, Руководство пользователя

Страница: 52 / 61

Quicksilver 755CR — Electrical Systems
40
5. Fuses and Breakers
Your boat will either have fuses or breakers protecting the DC electrical system. If you have to replace
a fuse or electrical breaker, replace only with a fuse or breaker of the same rating. The amperage will
be marked on the fuse or breaker, and it is recommended that you carry spare fuses or breakers.
Use only fuses and breakers having the same amperage
rating as the original or as specified. Use of higher
amperage fuses or breakers is a fire hazard.
If a fuse or breaker is replaced with one that has a lower amperage, it may not be sufficient to carry
the electrical load of the equipment it is connected to and will cause nuisance failures. If a fuse or
breaker is replaced with one that has a higher amperage, it will not provide protection against an
electrical malfunction and could create a possible fire hazard.
Battery Panel
Charge relay
Battery switch
CO monitor breaker — 5 Amp
Waste pump breaker—20 Amp
Spare breaker — 10 Amp
Aft bilge breaker—3 Amp
Forward bilge breaker—3 Amp
Stereo breaker—10 Amp
Main helm breaker—60 Amp
Waste pump switch
Fuses and breakers
ATO/ATC fuse Thermal breaker ANL fuse Magnetic breaker
Panel location