Quicksilver 675 Pilothouse, Руководство пользователя

Страница: 46 / 60

Quicksilver 675PH — System & Component Overview and Operation
34
Vision from the exterior helm station is limited. Maintain a
lookout as required. Do not operate at planning speeds
from the exterior helm.
DO NOT TURN THE STEERING WHEEL AT THE HELM
THAT DOES NOT HAVE FULL CONTROL OF THE BOAT.
Pressing this button twice will immediately transfer throttle and shift control. The “Active Helm”
panel will illuminate and two loud beeps will be heard. This completes the helm control transfer.
To return control back to the main helm, move the control to neutral. Go to the main helm, press
and release the “Throttle Only” button on the control handle twice.
Pressing this button twice will immediately transfer throttle and shift control. The “Active Helm”
panel will illuminate and two loud beeps will be heard. This completes the helm control transfer.
The steering system is independent of the helm selector switch and will operate at all times. DO NOT
TURN THE STEERING WHEEL AT THE HELM THAT DOES NOT HAVE FULL CONTROL OF THE BOAT!
Hydraulic Steering
The exterior helm comes with an additional steering helm, steering wheel, and steering hoses that
connects to the base steering system. The operation of the system is similar, where when you turn
the steering wheel the helm pump forces hydraulic fluid through hoses to and from the steering
cylinder which is connected to the tiller arm on the engine. Even though the helms are connected,
the steering wheels will not rotate together when one wheel is turned.
Maintenance
A hydraulic steering system rarely needs to be refilled after the system is bled. However, if you ever
need to add fluid to the system, refer to the steering manufacturer’s manual for complete
instructions.
REFER TO OWNER’S MANUAL PACKAGE FOR INSTRUCTIONS AND WARRANTY INFORMATION.
Dual Helm Hydraulic Steering
Steering wheel
Main helm pump
Hydraulic fluid lines
Exterior helm pump
Steering cylinder