Quicksilver 2M 70CM, Руководство пользователя

Страница: 27 / 62

21
Transceiver
6
80831 C Group 3
Transceiver
7
80832 C Group 3
Transceiver
8
80833 C Group 3
Transceiver
9
80834 C Group 3
Transceiver
10
80835 C Group 3
Send the ID code: 80814 to call "Transceiver 4".
Send the ID code: 80832 to call "Transceiver 7".
Send the ID code: 8081C to call all transceivers in
Subgroup 1.
Send the ID code: 8083C to call all transceivers in
Subgroup 3.
Send the ID code: 808CC to call all transceivers in
Group 1 and Subgroup 3 which are both in Group C.
DTMF code transmission mode:
1, Automatic transmission: Fill in the DTMF call list
in the programming software. In VFO / MR / CH
mode, be sure that DTMF Mode is enabled.
Press the CALL key (A key on the DTMF
microphone). Select an autodial slot from the list.
Press the PTT key to send the selected DTMF
sequence. (Note: Slots 0-9 can be entered directly, or