Quickie Xenon Скачать руководство пользователя

Страница: 3 / 36

Foreword

Dear Customer,
We are very pleased that you have decided in favour of a

high-quality SUNRISE MEDICAL product.
This Owner’s manual will provide numerous tips and

ideas so that your new wheelchair can become a

trustworthy and reliable partner in your life.
Maintaining close ties to our customers means a lot to us

at Sunrise Medical. We like to keep you up-to-date about

new and current developments at our company. Keeping

close to our customers means: fast service, as little red

tape as possible, working closely with customers. When

you need replacement parts or accessories, or if you just

have a question about your wheelchair – we are there for

you.

We want you to be satisfied with our products and

service. At Sunrise Medical we are constantly working to

develop our products further. For this reason, changes

can occur in our palette of products with regard to form,

technology, and equipment. Consequently, no claims can

be construed from the data or pictures contained in this

owner’s manual.

The management system of SUNRISE MEDICAL is

certified to DIN EN ISO 9001, ISO 13485 and ISO

14001.

As the manufacturer, SUNRISE MEDICAL,

declares that the lightweight wheelchairs

conform to the 93/42/EEC 2007/47/EEC

guideline.

Please contact your local, authorised SUNRISE

MEDICAL dealer if you have any questions regarding the

use, maintenance or safety of your wheelchair.
In case there is no authorised dealer in your area, or you

have any questions, contact Sunrise Medical either in

writing or by telephone.

Sunrise Medical Limited

High Street Wollaston

West Midlands DY8 4PS

England

Tel.: +44 (0) 1384446688

www.sunrisemedical.com

IMPORTANT:

DO NOT USE YOUR WHEELCHAIR UNTIL

THIS MANUAL HAS BEEN READ AND

UNDERSTOOD.

Use

Wheelchairs are exclusively for a user who is unable to

walk or has limited mobility, for their own personal use,

when self-propelling and being moved by a third party

(pushed by attendant) within the home and outdoors.

The maximum weight limit (includes both the user

and any weight of accessories fitted to the

wheelchair) is marked on the serial number label,

which is affixed to the cross-brace or the stabilising

bar under the seat.

Warranty can only be issued if the product is used under

the specified conditions and for the intended purpose.

The expected life of the wheelchair is 5 years.

NO NON-STANDARD PARTS are to be fitted, other than

those officially approved by Sunrise Medical.

Area of Application.

The variety of options as well as the modular design

means that it can be used by those who cannot walk or

have limited mobility because of:

• Paralysis

• Loss of extremity (leg amputation)

• Extremity defect/deformity

• Joint contractures/joint injuries

• Illnesses such as heart and circulation deficiencies,

disturbance of equilibrium or cachexia as well as for

elderly people who still have strength in the upper body.

When considering provision, please also note the body

size, weight, physical and psychological constitution, the

age of the person, living conditions and environment.

Содержание Xenon





































Результаты поиска

Содержание Xenon

Отзывы:

Похожие инструкции для Xenon

Бренды по названию

Популярные бренды

Quickie Xenon, Инструкция по применению

Результаты поиска

Содержание Xenon

Отзывы:

Похожие инструкции для Xenon

Бренды по названию

Популярные бренды