manualshive.com logo in svg

Quickie Xenon, Инструкция по применению

Поделиться
Скачать
Quickie Xenon Скачать руководство пользователя страница 26

26

Maintenance and Care continued

Hygiene measures when being re-used:

Prior to the wheelchair being re-used, it must be carefully 

prepared. 

WARNING!

All surfaces which come into contact with the user must 

be treated with a disinfection spray.

To do this, you must use a disinfectant from the DGHM 

list, e.g. Antifect Liquid (Schülke & Mayr) for rapid alcohol-

based disinfection for medical products and medical 

devices, which must be disinfected quickly.

Please take into account the manufacturer's instructions 

for the disinfectant you are using.

In general, a complete disinfection cannot be guaranteed 

on seams. We therefore recommend that you dispose of 

seat and back slings to avoid microbacterial contamination 

with active agents according to § 6 infection protection 

law.

Troubleshooting

Wheelchair pulls to one side

• Check tyre pressure

• Check to make sure wheel turns easily (bearings, axle)

• Check the castor angle

• Check to make sure both castors are making proper

  contact with the ground

Castors begin to wobble

• Check the castor angle

• Check to make sure all bolts are secure; tighten if 

  necessary (see the section on torque)

• Check to make sure both castors are making proper 

  contact with the ground

Wheelchair / cross-tube assembly does not snap into 

position in the seat saddle

• Chair is still new, i.e., the seat or backrest upholstery is 

  still very stiff. This will improve with time.

Wheelchair is difficult to fold up

• Adjustable backrest upholstery is too stiff. Loosen it

 accordingly.

Wheelchair squeaks and rattles

• Check to make sure all bolts are secure; tighten if 

  necessary (see the section on torque)

• Apply small amount of lubrication to spots where 

  movable parts come in contact with one another

Wheelchair begins to wobble

• Check angle at which castors are set

• Check tyre pressure

• Check to see if rear wheels are adjusted differently.

Disposal / Recycling of Materials

NOTE:

 If the wheelchair has been made available to you 

as part of a charity or medical loans scheme, then it may 

not belong to you . If it is no longer required, then follow 

the instructions to return it as given by the organisation 

that made the wheelchair available to you.

In the following section, there is a description of the 

materials used on the wheelchair, in view of the disposal 

or recycling of the wheelchair and its packaging.

There may also be special local regulations in force with 

regard to disposal or recycling, these must be taken into 

account when disposing of your wheelchair. (This can 

include the cleaning or decontamination of the wheelchair 

prior to disposal).

Aluminium:

 Castor forks, wheels, chair sideguards, 

armrest frame, footrest, push handle

Steel:

 securement points, quick-release axle

Plastic:

 Handles, tube stoppers, castors, footplates, 

armpads and tyres

Packaging:

 Plastic bags made of soft polyethylene, 

cardboard

Upholstery:

 Polyester fabric with PVC coating and highly-

flammable foam.

Disposal or recycling should be carried out by a disposal 

company or at a public disposal point. You can also return 

your wheelchair to your dealer for disposal.

Содержание Xenon





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды