Quickie Xenon Скачать руководство пользователя страница 10

Страница: 10 / 36

Quick Release Wheels

Quick-release axles on rear wheel

The rear wheels are equipped with quick-release axles.

The wheels can then be fitted or removed without using

tools. To remove a wheel, simply depress the quick-

release button on the axle and pull the wheel off the axle.

(Fig. 7).

CAUTION!

Hold the quick-release button on the axle depressed

when inserting the axle into the frame to mount the

rear wheels. Release the button to lock the axle in

place. The quick-release button should snap back to

its original position.

Options - Step Tubes

Step tubes are used by attendants to push a wheelchair

over an obstacle. Simply step on the tube to push a

wheelchair, for example, over a kerb or step, (Fig.8).

Options - Brakes

CAUTION!

Braking power can be

affected by incorrect fitting and

adjustment of the brakes, as well as tyre pressure which is

too low.
Wheel locks

Your wheelchair is equipped with two wheel locks. They

are applied directly against the tyres. To engage, press

both brake levers forward against the stops. To release

the locks, pull the levers back to their original positions.
Braking power will decrease with:

•

Worn tyre tread

•

Tyre pressure that is too low

•

Wet tyres

•

Improperly adjusted wheel locks.

The wheel locks have not been designed to be used as

brakes for a moving wheelchair. The wheel locks should

therefore never be used to brake a moving wheelchair.

Always use your hands for braking. Make sure that the

gap between the tyres and wheel locks complies with

given specifications. To readjust, loosen the screw and set

the appropriate gap. Then re-tighten the screw

(Fig. 9 and 10).

CAUTION!

After each adjustment of the rear wheels, check the wheel

lock gap and re-adjust if necessary.

3.0mm

Fig. 10

Fig. 9

Fig. 8

Fig. 7

Содержание Xenon





































Результаты поиска

Содержание Xenon

Отзывы:

Бренды по названию

Популярные бренды

Quickie Xenon, Инструкция по применению

Результаты поиска

Содержание Xenon

Отзывы:

Бренды по названию

Популярные бренды