Quickie Quickie Revolution, Руководство пользователя

Страница: 31 / 47

27 Revolution Issue 5
Fig. 33
Fig. 32
Chair adjustments
Anti-tip tubes
The anti-tip tubes (Fig. 32) can be
changed in height, by pressing in
the location pins (1) in the anti-tip
tube (2) and sliding the anti-tip
adjusting sleeve (3) to the desired
position. The location pin will snap
into the desired hole (4) in the
adjusting sleeve.
2 1 3 4
2 1 3 5 4
Rear axle positions
Centre of gravity
The centre of gravity (Fig. 33) is
adjusted by moving the axle
assembly (1) and camber bar (2)
on the indexed axle plate (3).
To move the axle assembly undo
and remove the retaining bolts (4)
and nuts, using a 4mm Allen key
and an 10mm A/F spanner, and
locate the assembly in the desired
index holes (5), Fit the retaining
bolts and nuts, and tighten to
8-10Nm torque.