Quickie Attitude Скачать руководство пользователя

Страница: 83 / 86

ENGLISH

Attitude Power Rev.1.0

Charging the battery:

Fully charge the battery before its first use. The battery

capacity upon delivery is generally 30%. The battery can

be charged at any capacity without adversely impacting

its service life. The battery achieves its maximum service

life when it is charged at an ambient temperature of

b10 °C and +30 °C

Connecting the battery charger:

The battery [1] does not need to be removed from the

add-on bike for charging, it can stay where it is.

Then,proceed as before.

Insert the plug [9] of the battery charger into the socket

[3] on the battery, (Fig.4.4).

Carry out the charging process according to the

specifications in the charger operating manual.

In addition, follow the instructions on the charging

process given in section 3.0.

Before inserting the plug [9] in the socket [3], ensure that

both parts are clean and there are no metallic particles

on them. If you detect such particles, use a dry and clean

cloth to remove them.

Charging process:

When charging the battery follow the instructions

in the charger operating manual.

Also observe the safety information and precautions

provided in section 3.0

LED displays during the charging process:

During charging, the LED display on the battery shows

the charging level.

Press the button, (A), briefly to display the charge status,

(Fig.4.5).

Fig.4.4

Fig.4.5

Füllstand Batterie/Battery Level

100% 80% 50% 20%

CAUTION!

•

Do not leave the charger connected to the mains

socket any longer than necessary.

•

When the charging process is complete, disconnect

the charger from the mains socket first before

disconnecting it from the battery.

•

Before using the device, always check the charge

status of the battery.

•

The battery should be fully charged prior to use in

order to provide motorised support at all times.

•

The battery may only be charged in a dry room at

temperatures between 0° and 40° C.

•

We recommend charging the battery fully before long

periods of storage, eg, before a winter break

Please observe the instructions in the operating

manual enclosed with the charger.

Observe the safety information and precautions

regarding the battery provided in sections 2.1 to

2.5 of this operating manual.

Содержание Attitude























































































Результаты поиска

Содержание Attitude

Отзывы:

Похожие инструкции для Attitude

Бренды по названию

Популярные бренды

Quickie Attitude, Инструкция по применению

Результаты поиска

Содержание Attitude

Отзывы:

Похожие инструкции для Attitude

Бренды по названию

Популярные бренды