ENGLISH
45
Attitude/Attitude Hybrid Rev.1.0
Fig.7.6
Fig.7.5
7
3
Fig.7.7
6
3
2
Detaching the battery:
Switching off the battery:
The battery is switched off using the sMMI controller (see
the sMMI and motor operating manual). This puts the
battery initially in Active mode for 48 hours. This means
that, within this period, the sMMI can be reactivated at
any time without having to first switch on the battery. The
power required for this is minimal.
Disconnecting the cable:
•• Disconnect the add-on bike on the sMMI.
•• Then remove the plug of the motor cable [7] from of the
socket [3].
CAUTION!
Ensure that the plug of the motor cable [7] does not come
into contact with any metallic particles when being set
down (risk of contamination).
Removing the battery:
•• Insert the key [2] in the lock on the battery [1].
•• Carefully turn the key [2] anticlockwise until it stops.
The lock is now released, the
key can no longer be removed from the battery.
•• Pull the battery [1] upwards about 2 cm along the slide
rail [6] and then remove it
completely.
•• Store the battery in a clean place.
CAUTION!
Ensure that the socket [3] does not come into contact
with any metal
Содержание Attitude
