Quickie Attitude, Инструкция по применению

Страница: 14 / 86

ENGLISH
14
Attitude/Attitude Hybrid Rev.1.0
Connecting frame (Fig.6.1):
The connecting frame acts as a parking stand, and
fascilitates easy docking/manoeuvring when the add-on
bike is disconnected from the wheelchair.
The height of the stand wheels can be adjusted using the
bolts, (A).
WARNING!
• The stand wheels must always stay min 3 cm above
the ground, when the add-on bike is connected to the
wheelchair.
• The stand wheels must be always adjusted so that the
stand of the add-on bike remains stable when the add-
on bike is disconnected from the wheelchair.
Brakes:
The add-on bike has two brakes that work independently
from one another.
Parking brake (Fig.6.2 ):
The parking brake is assembled to the fork and locks in
automatically when activated. Therefore the red lever
must lock in. The add-on bike should not move with
activated parking brake to make sure parking is safe
To release the parking brake just push the red lever.
Main brakes (Fig.6.3):
The brakes allow you to safely and comfortably brake
your add-on bike.
WARNING!
• If the main brakes should fail, then the parking brakes
may be used once for emergency braking.
• The main brakes must be repaired imediately before
next use.
• Hard and sudden application of the brakes may cause
you to fall forward with your upper body, resulting in
possible injury. Therefore always stabilise yourself by
holding onto the handles firmly with both hands.
• Braking power can be severley decrease by any or all
of the following:
1. worn tyre tread
2. air pressure which is too low
3. soiled and wet tyres.
• Ensure that the brake pads and brake discs do not
become contaminated with oil and/or grease. If this
happens the brake pads must be replaced. The brake
disc must be professionally degreased with a brake
cleaner.
• Be aware that the condition of the ground surface can
significantly affect braking efficiency.
WARNING!
• The braking effect will be greatly reduced if the surface
is wet, dirty, sandy, stoney, uneven or otherwise
compromised by environmental conditions. It is best to
avoid such conditions, but if this is not possible adapt
your driving style to avoid the risk of potentialy serious
accidents.
• Dirty and wet rims and brake pads also reduce the
braking effect when using rim brakes. For this reason,
you should always adapt your method of riding to the
environmental conditions in order to avoid serious
accidents.
• Always check the efficiency of the brakes before
starting your journey to ensure that they are working
correctly. The brakes should be checked regularly by
your dealer and adjusted if required.
Fig.6.1
A
Fig.6.2
Fig.6.3
6.0 Functional Components