28
EN
INSTALLATION AND USE MANUAL QUICK
XR7
- REV001A
XR7
8 - Maintenance
WARNING:
make sure the electrical power to the motor is switched off when working manually on the windlass. Carefully re-
move the chain or rope from the gypsy or the rope from the drum.
Quick
®
windlasses are manufactured with materials resistant to marine environments.
In any case, any salt deposits on the outside must be removed periodically to avoid corrosion and damage to the
equipment.
• The parts where salt may have built up should be washed thoroughly with fresh water.
• Once a year, the drum and the gypsy are to be taken apart as follows:
Clean all the parts removed to avoid corrosion, and grease the shaft thread and the gypsy (use grease
suitable for marine environment).
see engineering drawings on page.24
9 - Disposal of the product
As in installation, also at the end of product lifetime, the disassembly and scrapping operations must be performed by qualified
personnel.
This product is made up of different types of material, some of which can be recycled while others must be disposed of. Seek
information on the recycling and disposal systems envisaged by the local regulations in your area for this product category.
Some parts of the product may contain polluting or hazardous substances which, if disposed of into the environment, constitu-
te serious environmental and health risks.
As indicated by the symbol, the product may not be disposed of as domestic waste. Sort the materials for disposal,
according to the methods envisaged by current legislation in your area, or return the product to the retailer when
purchasing an equivalent product.
Local legislation may include the application of serious fines in the event of improper disposal of this product.
Содержание XR7 4000 AC DX
Страница 31: ......
