Quick SBC 1100 NRG+ FR, Руководство по установке и использованию

Страница: 27 / 32

27
EN
SBC NRG
+
HIGH REV001B
TECHNICAL DATA
QUICK
®
RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT PRIOR NOTICE.
TECHNICAL DATA
(1) Maximum rated value at normal use or in short circuit.
(2)
With battery charger not supplied by the AC network and with disabled monitor mode and LCD terminal not connected.
(3) At 50% of the maximum rated output current on resistive load.
(4)
Each output can supply the maximum value of nominal current. The sum of the currents supplied from each output can not exceed the maxi-
mum nominal value of the equipment.
(5)
With supply voltage equal to 230 Vac and output current equal to the maximum nominal value.
(6) With supply voltage equal to 120 Vac and output current equal to the maximum nominal value.
(7)
Protection may be inefficient in some operative conditions.
(8) Software/hardware double-check.
MODEL SBC 1100 NRG+ FR SBC 1200 NRG+ FR SBC 1450 NRG+ HR SBC 1950 NRG+ HR SBC 2450 NRG+ HR
OUTPUT CHARACTERISTICS
Maximum output current
(1) 80 A 100 A 60 A 80 A 100 A
Charge ABSORPTION voltage
• 14,1 Vdc EL open
• 14,2 Vdc Li-Ion
• 14,4 Vdc EL sealed / Gel / AGM
• 14,7 Vdc Optima
®
• 28,2 Vdc EL open
• 28,4 Vdc Li-Ion
• 28,8 Vdc EL sealed / Gel / AGM
• 29,4 Vdc Optima
®
Charge float VOLTAGE
• 13,4 Vdc EL open
• 13,5 Vdc Li-Ion
• 13,6 Vdc AGM
• 13,8 Vdc EL sealed / Gel / Optima ®
• 26,8 Vdc EL open
• 27 Vdc Li-Ion
• 27,2 Vdc AGM
• 27,6 Vdc EL sealed / Gel / Optima ®
DC absorption from the batteries
(2)
< 3,5 mA < 5 mA
Residual ripple
(3) < 100 mV RMS < 150 mV RMS
Charging characteristics Automatic in three stages IUoU
Number of outputs
(4) 3
INPUT CHARACTERISTICS
Supply voltage
264 ÷ 83 Vac,
with power reduction under 108 Vac
264 ÷ 161 Vac,
with power reduction under 207 Vac
Frequency 45÷66 Hz
Maximum absorption
(230/240 Vac)
(5)
5,4 A 6,5 A 7,5 A 10,1 A 12,5 A
Maximum absorption (120 Vac) (6) 10,6 A 12,7 A -
Power factor (cos ϕ )
(5)
1,00
Efficiency
(5) ≥
88%
≥
92%
PROTECTIONS
Reverse polarity
(7) Yes, through fuse
Overload Yes
Output short circuit Yes
Overvoltage in output
(8) Yes
Overheating Yes
Battery overtemperature Yes, optional
AMBIENT CHARACTERISTICS
Operating temperature -15 ÷ +70 °C, with linear power reduction over +50 °C
Cooling Forced, with variable fans speed
Humidity Max. 95% RV without condensation
CASE
Material Aluminium
Dimensions (WxHxD) 170 x 481 x 81,5 mm
Weight 4,2 kg
GENERAL
CAN bus interface Yes
Charge compensation Yes, optional (max 128 battery temperature sensors)
Safety standard EN 60335-2-29
EMC Standard EN 55032/A - FCC TITLE 47 PART 15 SUBPART B CLASS A