7
Please use robot within the standard requirements (such as
voltage, air pressure, power frequency) as stated in the
specification.
Make sure the air source is clean and dry.
Suggest the air pressure is less than 0.7Mpa.
Attention
Do not throw the packaging and foamed plastic.
If the robot should come back to the manufacture or agency,
it must be folded by initial package.
The robot must be placed vertically.
The robot can be packet after fold by foamed plastic.
The robot can not get wet in transit or stored procedures.
1.2 Unpacking and inspection
Wooden case packing
：
①
Put wooden case packing on the floor vertically, tear up the fixed film.
②
Take the screw out of the wooden case by drill and unfold the wooden case.
③
Take and carry the device by two or more people, put firmly on appropriate station.
④
Unfold the packaging, before using the robot, make sure the movements’ fixture (for
example the X-axis may be fixed by sheet metal or lines for safety) is taken down.
⑤
All fittings are in the table as follow.
NO.
Part Name
Model
Quantity
Figure
1
Heating controller
378FA
1
2
Teach pendant
QUICK 9011D
1
3
Teach pendant cord
DB9
1
