BT QSY
Series
EN
QUICK
BTQSYSeries
INSTALLATION AND USER’S MANUAL - REV001B
11
4 - Installation
4.4 - BT QSY 140/185/250/300 Gearleg and motor support flange
• Fit the gearleg with the special seal gasket.
SILICONE
• For further protection against the entry of water, apply
silicone for nautical use around the point of contact
between flange and tube.
•
Fasten everything with the flange using the special
screws and washers.
1
• Grease the terminal part
of the gearleg shaft; fit the
small key into its seat.
2
• Insert the elastic coupling in the
terminal part of the gearleg shaft.
3
• Grease the terminal part
of the drive shaft; fit the
key into its seat.
4
• Insert the motor onto the elastic
coupling; secure it with the 4
screws and washers supplied.
4.4.0 - Single & double propeller assembly
Single propeller assembly
Insert propeller
A
on the shaft of gearleg
B
, secure the
propeller with the self-locking nut
C
, insert anode
D
and
lock it with the other self-locking nut
C
.
Propeller assembly
Insert the drive key/pin
A
on gearleg
B
; fit the propeller
C
to the
gearleg by engaging it to the drive key/pin
A
; secure the propeller
with the self-locking nut
D
. Insert anode
E
on nut
D
and lock it
with screw
F
smeared with threadlocker (loctite type).
A
C
C
D
B
LOCTITE
A
B
C
D
F
E
C
D
E
F
A
KEY
WARNING:
on conclusion of assembly, make sure that the propeller is exactly positioned at
the central point of the tunnel.
