5)
Communication option
6)
Video option
7)
Language (simplified Chinese or English can be selected.)
8)
The mode of heater head running down (0 or other digit).
10、
Operating Technics Instruction
Note: Top and Bottom Heater will be very hot during working, so please don’ touch the hot surface of the
parts.
10.1
Soldering Technics (System’s power supply is on)
1．
Turn on power switch of each part.
2．
Move PCB Fixture bracket with PCB above the Bottom heater and make the soldered component on the PCB
between Top heater and Bottom heater (the soldered elements have been placed on the PCB board). The
position of the soldered BGA must be corresponding with the position of the sirocco nozzles.
3．
Select parameters or set the parameters with keys.
A．
Select the required flow, if need to modify the parameter, input the password before performing relevant
operation.
B．
Select “solder” working mode.
C．
No change in communication speed, and press “SAVE” button to save and exit to MAIN surface.
D．
System starts working after pressing “START”, running the select flow
4
．
LCD will display series of setting temperatures and the current temperature during working. and user can
know about the setting value clearly.
5．
The system can perform a series action during the flow.
A．
After press START key, the top heater move downward near to bottom.
B．
When the flow from D1 to D6 is over, the top heater arm moves upwards and the flow runs the
cool zone
.
The top nozzle blows cooling air and bottom sirocco nozzle stop blowing warm air to blow cooling air,
Page 12
Содержание BGA2100
Страница 1: ...QUICK BGA 2100 ...
