background image

 

 

Controls 

 

 

Results Display 

 

 
 
 
 

Switched On Indicator 

The microPAT is very simple to operate. The only controls 
are four buttons used to select the required test. 
To operate, simply press and release the appropriate test 
button. 
The indicator next to the test button will flash amber while 
the test is being performed. 
 
The test results are displayed for ten seconds after the test 
is completed, the microPAT then shuts down.

 

When the test is complete the results appear on the results display. 
If all the required tests pass, the green PASS indicator will light up. 
If any of the required tests are a fail, the corresponding red FAIL indicator 
will light up. 
Additionally the indicator next to the test button will be green or red. 
 
A new test can be started as soon as the results are being displayed, 
there is no need to wait until the microPAT has shut down. 

Any appliance switch must be in the ‘on’ position during 
testing. 
When testing Class 1 or Class 2, the microPAT will attempt 
to determine if the appliance is switched on. 
If it is unable to detect the appliance is switched on, the 
‘Switched on ?’ indicator will flash red. If the appliance is 
then switched on within five seconds the test will continue. 
 
However because of the design of some appliances it is not 
always possible for the tester to determine if it is switched 
on. In this case pressing the corresponding test button will 
continue the test immediately. 

Содержание microPAT

















Отзывы: