quest roam SiPix, Руководство пользователя

Страница: 27 / 31

Problem Possible cause Solution
The camera has The camera is off. Make sure that the main switch is
no power. not set to OFF.
The batteries are Replace the batteries with new or
discharged. freshly charged ones.
The batteries are inserted Check the battery orientation.
incorrectly.
The camera won’t Ensure that the Standby If the LED is flashing, wait until
take a picture. LED is on and is not it emits a steady light before
flashing. taking the picture.
Is the camera’s memory If the memory is full, you cannot
full? take any more pictures. Check
the remaining shots and delete
some pictures to free up memory.
Is the camera connected The camera’s buttons are not
to a computer? functional when connected to a
PC. Disconnect the camera to
take more pictures.
The flash doesn’t Is the flash on? Ensure that the flash is set to
work. Automatic Flash.
The batteries my be weak. If the batteries are too weak, the
flash is unable to recharge. Turn
the camera off and wait a few
seconds before turning it back on.
If this doesn’t work, you need to
replace the batteries.
The image is The camera or subject was Hold the camera steady or put it
blurry. moving when the shot was on a tripod to take pictures.
taken.
Or ensure that the camera focus is
set the appropriate mode.
The image is too The flash is needed for the Turn the flash to Automatic Flash.
dark shot.
The image is too You are facing a bright Change the angle of the shot so
light. light when taking the that any bright lights do not
pictures. shine directly towards the camera
lens.
Camera beeps after The coin battery was inserted Remove the AA and coin batteries.
I insert the batteries. before inserting the AA Insert the AA batteries then the coin
batteries battery.
Troubleshooting
27