quest roam SiPix, Руководство пользователя

Страница: 14 / 31

14
Included with your iQuest Roam dual mode camera are three software applications
and the iQuest TWAIN driver. You need to install the iQuest TWAIN driver to make
the camera work with the software provided, as well as any other TWAIN-compliant
application. The rest of the software is not necessary to make the camera work,
but is there to enhance the functions of the camera. You will need to restart your
computer after the driver is installed. Follow these instructions to install the iQuest
Roam driver and application software on your system.
Installing the SiPix iQuest TWAIN Driver
1. Insert the iQuest Roam software CD into your CD-ROM drive. The following
screen appears:
2. Choose Install iQuest Roam TWAIN Driver from screen above.
3. Choose Next .
Installing the Driver and Software
Note: If the screen doesn’t appear, click Start , and then click Run . In the Open box,
type “D:\Setup.exe” where D is the letter of your CD-ROM drive. Then click OK to
open the screen.